U.S. residential electricity EIA data: August 2026 US average 18.2¢/kWh Updated

Outdoor & Garage · District of Columbia

How Much Does It Cost to Run a Pool Pump in District of Columbia?

The short answer

In District of Columbia, a pool pump drawing 1,500W costs about $0.39 per hour — roughly $94.84 a month if it runs 8 hours a day.

That’s based on District of Columbia’s average residential rate of 26.0¢/kWh (EIA, August 2026), 43% above the US average.

Source: U.S. EIA, August 2026 data · Updated

Pool Pump cost by daily use in District of Columbia

Cost at 26.0¢/kWh, the District of Columbia average (EIA, Aug 2026)
Daily usekWh/monthPer dayPer monthPer year
1 hour/day 45.6 $0.39 $11.85 $142
2 hours/day 91.3 $0.78 $23.71 $284
4 hours/day 182.5 $1.56 $47.42 $569
8 hours/day 365.0 $3.12 $94.84 $1,138
12 hours/day 547.6 $4.68 $142 $1,707
24 hours/day 1,095.1 $9.35 $285 $3,414

District of Columbia vs other states

At typical use, a pool pump costs $1,138 a year in District of Columbia — $929 less than in Hawaii and $581 more than in Nevada.

District of Columbia has the 9th-most-expensive residential electricity of the 50 states and DC. District of Columbia price per kWh · all states ranked

Electricity price trend in District of Columbia

26.0¢/kWh in August 2026 — ▲ +12.1% from a year earlier.

How to lower the cost of running a pool pump

Pool pumps can be one of the biggest electricity users in a home with a pool because they run for many hours every day of the season. A single-speed 1–2 HP pump typically draws 1,000–2,500W. Variable-speed pumps are dramatically more efficient: running at low speed for longer moves the same water with a fraction of the energy, which is why many states now require them for new installs.

  • Switch to a variable-speed pump — savings of 50–80% are common.
  • Run the pump only as long as needed to turn over the water once a day.
  • Keep skimmer baskets and filters clean so the pump doesn't strain.

Questions

Frequently asked questions

How much does it cost to run a pool pump for 24 hours in District of Columbia?

Running a 1,500W pool pump for 24 hours uses about 36.0 kWh, which costs about $9.35 at District of Columbia’s average rate of 26.0¢/kWh.

How many kWh does a pool pump use per month?

At 8 hours a day, a typical pool pump uses about 365 kWh a month. In District of Columbia that costs $94.84.

Is it expensive to run a pool pump in District of Columbia?

District of Columbia has the 9th-most-expensive residential electricity of the 50 states and DC at 26.0¢/kWh — one of the most expensive. Running a pool pump here costs about $1,138 a year at typical use, compared with $795 at the national average rate.

What is the electricity rate in District of Columbia right now?

The average residential electricity rate in District of Columbia was 26.0¢ per kWh in August 2026, according to the latest EIA data — up 12.1% from a year earlier.

Sources & method